7000F

AKSAD GROUP PETROCHEM

7000F (FILM GRADE)

PRODUCT DESCRIPTION

000 F is a high density polyethylene resin ;a product of bi-modal process from Mitsui Chemicals, Inc. of Japan

TYPICAL APPLICATION

Recommend film thickness at 10-25 micron

Shopping bag and T-shirt bag

High tensile strength with good dart impact strength

Garbage bag

Low gel content

Liner bag

Good moisture barrier

Enhanced ultra thin film

Food contact applicable

High stiffness

Wide service Temperature range, UV resistance

Method	Unit	Value	Properties
ASTM D 1238 @ 190 o C, 2.16 kg	g/10 min	0.04	Melt Flow Rate
ASTM D 1505	g/cm3	0.954	Density
ASTM D 2117	C°	131	Melting Point
ASTM D 1525	C°	124	Vicat Softening Point
ASTM D 746	C°	< -60	Brittleness Temperature
ASTM D 1693 @ 50 o C	hrs, F50	> 1000	ESCR
ASTM D 638 @ crosshead speed 50mm/min	kg/cm2	MD: -, TD: 250	Tensile Strength@ Yield
ASTM D 638 @ crosshead speed 50mm/min	kg/cm2	MD: 620, TD: 310	Tensile Modulus, 2% Secant
ASTM D 638 @ crosshead speed 50mm/min	kg/cm2	MD: 8200, TD: 8000	Elongation@Break
ASTM D 638 @ crosshead speed 50mm/min	%	MD : 240, TD : 450	Elmendorf Tear Strength
ASTM D 1922	g	MD : 3, TD : 80	Elmendorf Tear Strength
ASTM D 1709	g	139*	Dart Impact Strength

(*) Properties obtained from film produced on a pilot line , 12 micron, BUR 5:1, MD = Machine Direction, TD = Transverse Direction Note : Conversion factor for changing unit from kg/cm2 to MPa is divided by 10.2

PROCESSING TECHNIQUES

The actual extrusion condition depends on type of using machine, size and film thickness of product required. diameter. Generally, melt temperature should be 190-210 oC with BUR = 3-5 times and frost line height (FLH) = 8-10 times of die diameter.

Product Technical Assistance

For technical assistance or further information on this product contact MHPC technical team at the address or telephone number as specified below.

PRODUCT AVAILABLE FORM AND PACKAGING

Pellet

25 kg loose bag

Big bag with specified weight

STORAGE

Product(s) should be stored in dry and dust free location at temperature below 50o C and protected from direct sunlight and/or heat, well-ventilated area, away from incompatible materials and food and drink, as this may lead to quality deterioration, which results in odour generation and colour changes and can have negative effects on the physical properties of this product.

Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination

The storage area should be stable and not be slopped.

SAFETY

The product is not classified as a hazardous material.

Please see our Material Safety Data Sheet for details on various aspects of safety, recovery, and disposal of the products;

RECYCLING

The product is suitable for reclycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling

Please see our Material Safety Data Sheet for details on various aspects of safety, recovery, and disposal of the products.